Sale!

CTS Turbo MK6 Golf/GTI/JETTA OEM Intercooler Delete Kit

Code: CTS-HW-494

Original price was: US$69.99.Current price is: US$59.49.

In Stock
Included Warranty

12 Months
All CTS Turbo products are warrantied against manufacturing defects for a period of 12 months from the date of invoice. Warranty does not cover abuse, misuse, consequential damages, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective the customer will receive, at the discretion of CTS Turbo, free repair or replacement. Warranty on other manufacturers will be processed under their terms.

Share (3)
Total: 0 Total: 1 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 2

Description

We are proud to announce our OEM Intercooler Delete Kit for MK6 Golf/GTI/Jetta. This an easy way to improve airflow and reduce weight, but is also fully reversable.

Unlock the full potential of your MK6 platform by eliminating the weight of the unused OEM intercooler with our innovative kit. Say goodbye to restricted airflow and hello to improved cooling efficiency for your radiator and A/C condenser cores. Our kit provides a seamless solution for removing any OEM-style intercooler while still supporting the remaining components, ensuring optimal performance and enhanced airflow throughout your vehicle. Experience the benefits of increased cooling and improved overall efficiency with our easy-to-install kit designed specifically for the MK6 platform.

Fitment:

  • MK6 Golf/GTI
  • MK6 Jetta/GLI

 

Additional information

Weight 8 lbs
Dimensions 14 × 6 × 6 in

SPECS

TECHNICAL SPECIFICATIONS

ABCD

144MM

50.6MM21MMARP 2000

INSTALL SUPPORT

Verify Clearances

 

Before installing your CTS connecting rods it is recommended you measured all the critical clearances. Make sure to record the measurements for each rod and number match them to the bearing set, crankshaft journal, and wrist pins.

** You must use a quality bore gauge and micrometer, record the following measurements:**

  • Wrist pin diameter
  • Wrist pin bushing bore
  • Wrist pin clearance (Bore minus diameter
  • Rod journal (w/bearings)
  • Crankshaft journal diameter
  • Journal clearance 

 

Torque Specifications

STEP 1 -PRE-TORQUE:

Before you final stretch the rod bolts, it’s important the bolt and rod threads are fully seated.

  • Install rod bearings
  • Align matching printed numbers on rod and cap
  • Assemble cap to rod
  • Apply ARP assembly lube to bolt threads
  • Hand tighten bolts
  • Using a quality calibrated torque wrench, torque bolts to 50 ft/lbs
  • Break bolts loose, and again torque to 50 ft/lbs
  • Break bolts loose, then torque to 50 ft/lbs one final time

STEP 2 -FINAL TORQUE:
The final torque spec is .006″ (stretch gauge) or 50 ft/lbs (torque wrench) with ARP assembly lube. The preferred method of measuring bolt load is with a stretch bolt gauge.

Stretch Gauge

  • Loosen bolt and zero stretch gauge
  • Tighten bolt to .006″ stretch
  • Loosen second bolt and zero stretch gauge
  • Tighten second bolt to .006″ stretch

Torque Wrench

  • Loosen bolt
  • Tighten bolt to 50 ft/lbs
  • Loosen second bolt
  • Tighten second bolt to 50 ft/lbs

Important notes

  • Do not exceed rod bolt stretch/torque. If bolt stretch is exceeded, replace rod bolts with new ones.
  • Torque wrench settings are given as a guide only, to ensure proper bolt installation a stretch gauge is required.
  • Do not install bolts dry or with any other lubricant than the supplied ARP assembly lube.

Model

Generation

Make Model Year Generation
Make Model Year Generation
VW GTI 2010 - 2014 MK6
VW JETTA 2010 - 2014 MK6
VW JETTA GLI 2010 - 2014 MK6

Related products