JE Forged Stroker Pistons
JE forged Stroker pistons are designed to add displacement by increasing the bore and stroke of your engine block. This increased displacement yields more power and torque on the same boost pressure, less chance of detonation at a given power level (Lower peak cylinder pressures), faster spool, and increased out of boost power levels. 2008cc 2.0L 92.8mm stoker pistons require modified 2.0L FSI forged crankshaft with 20mm wrist pin connecting rods.
JE Forged Pistons
These are a complete set of JE stroker pistons for all 1.8T 20V Turbo engines. JE Pistons make for a stout reliable engine for daily driving, road racing, drag racing, or full out competition racing. Built to withstand serious performance punishment, JE forged pistons have been specifically designed and engineered for acceleration forces of more than 8000 G’s and directional changes exceeding 200 times every second. Additionally, each forging is application specific minimizing weight and ensuring a reliable interaction with the rotating assembly. JE shelf pistons are available in a selection of bore sizes and compression ratios, if you do not see exactially what you are looking for, contact us for a custom piston quote.
Features
83mm bore, 9.5:1CR
Includes JE wire locks, Pro Seal piston rings, and standard JE wrist pins
No dish deburring or preparation needed
Individually prepared inspection report of dimensional conformity
Each piston individually serialized for complete traceability
23-point post-production inspection conducted by certified personnel
Tighter tolerances on 14 critical areas of the piston
All critical surfaces machined in dedicated Critical Manufacturing Cell
| Weight | 5 lbs |
|---|
